SG747 GENESIS SAB URUKAY - VERT

Made for the F3C competition! The brand new SAB URUKAY GENESIS is the evolution from the URUKAY COMPETITION with the new ingenious basic chassis of the SAB GOBLIN RAW 700. 
In connection with the adjustable rotor head, the new 747mm F3C rotor blades and the direct linkage, maximum precision is achieved. Everything optimized for F3C competitions. and sport flying.

• The same battery rails are used as in the Kraken 700/580 - H1102-S.
• Motor belt wheels of type H0175-xx-S also fit in the URUKAY GENESIS.

Main features:

• The new SAB Urukay Genesis is not only intended for F3C pilots.
• This is a first-class model for all pilots who want light elegance in full fairing.
• Based on the well-known SAB quality standard and influenced by the experience of top pilots 
  , the Urukay Genesis is not only an eye-catcher, but has also reached the peak of development in technical terms.

Technical data SAB URUKAY GENESIS

• Mechanics Weight: about 2950 grams (with rotor blades, without electronics)
• Main rotor blade length: 690 - 760mm
• Tail rotor blade length: 105 - 115mm
• Main rotor diameter: 1662mm (with 747mm blades included in the kit)
• Tail rotor diameter: 284mm (with 105mm blades included in the kit)
• Swashplate servos: Standard 40mm size
• Tail rotor servo: Standard 40mm size
• Main gear ratio: 11.8 - 8.8 (21 belt pulley included for 10.1: 1)
• Tail rotor ratio: 5.0 - 4.8: 1 (26 tail pulley included for 4.9: 1)
• Motor size: 4525
• Regulator size: 12S 160 - 200A
• Battery size: 12S 4500 - 5500 mAh, (56 x 70 x 320mm)

Module content:

• URUKAY GENESIS
• Battery rail
• 1 x 21T belt pulley
• 1 x 747mm F3C rotor blades
• 1 x 105mm SAB tail rotor blades
• manual

URUKAY GENESIS TECHNICAL SPECIFICATIONS

• AIRFRAME weight: 2950gr (with blades, no battery, no electronics)
• Main blade length: 690mm to 760mm
• Tail blade length: 105 to 115 mm
• Main rotor diameter: 1662 mm (with new F3c 747 mm blades included)
• Tail rotor diameter: 284 mm (with 105 mm tail blades included)
• Cyclic servos: standard size 40mm
• Tail Servo: standard size 40mm
• Main rotor ratio: 11.8 to 8.8 (21T included: 10.1: 1)
• Tail rotor ratio: 5.0-4.8: 1 (26T included: 4.9: 1)
• Typical motor: 4525 series
• Typical speed controller: 12S, 160-200 A
• Battery size: 12S 4500-5500 mAh