Menu
Beastx Microbeast Plus HD!
BEASTX MICROBEAST PLUS HD (V5): BeastX's electronic stabilization system in high intensity
A new ECU and more sensitive sensors for more feeling and responsiveness. Unaffected by helicopter vibrations. New lighter alu-composite case. With high current power supply. Always so easy to configure: the world champion system!
The MICROBEAST Plus HD is a 3-axis control system for RC flybarless helicopters. The latest generation MEMS sensors measure the rotational motion of the helicopter with unprecedented precision and transmit the data digitally and in real time to the system.
The composite material housing helps keep the mass of the MICROBEAST Plus very low.
System configuration can be done quickly and anywhere because it does not require expensive computers or programming programs.
All parameters can therefore be changed simply and easily on the flying field!
Other options are available with the USB2SYS interface (optional) and the StudioX software package. Thus, each pilot can customize the device according to his needs.
The MICROBEAST Plus can be updated using the update feature.
The device can be upgraded to ProEdition firmware with AttitudeControl (fallback function) at any time (paid option).
The MICROBEAST PLUS HD is the "heavy duty" version of the MICROBEAST PLUS with an additional high power supply particularly interesting for helicopters equipped with recent "standard" size servos, with high consumption.
Specifications:
Incorporates a power supply system allowing the servos to be powered with a current higher than that coming from the receiver, from a reception battery (NiMh, Lipo 2S or powerful BEC) instead of the traditional servo sockets limited to 5A. Supplied with remote electronic switch.
- Power supply: 3.5V - 8.5V DC (2S LiPo)
- Processor: 32-Bit ARM
- Sensors: 6-axis MEMS (gyro and accelerometer)
- Size: 36 x 25 x 21mm
- Mass without cables: approx. 19g
Technical characteristics :
- Pulse length: cyclic: 1520µs. Tail: 1520µs, 960µs, 760µs
- Servo frequency: cyclic: 50 - 200Hz. Tail: 50 - 560Hz
- Swashplate mixing: mechanical: 90°, 120°, 135°, 140°. With other features via StudioX.
Receiver Compatibility:
- standard receiver
- PPM "Signal Some"
- SRXL (JR XBus, SUMD, M-Link...)
- Futaba S.Bus/S.Bus2
- Spektrum* satellites (DSM2/DSMX) * Requires special cable, available as an option
In the box :
- MICROBEAST PLUS HD
- Cable with switch
- Power cable
- Cables to connect to the receiver
- Double-sided 3M
- Tool for configuration
- User manual in English, paper format
- "BeastX" sticker sheet
Options:
- PC connection interface via USB
- Cable to connect a Spektrum satellite
Manual Beastx Microbeast Plus
Comes with firmware V5.2.2
The new V5 firmware is installed on all versions of Microbeast Plus.
Main features of V5 version:
- Even easier and faster installation.
- The Spektrum satellite can be plugged in directly without an adapter.
- Now supports 4 swashplate servos.
- New features for rescue function (Pro Edition only)
- Bank change (Pro edition only)
- And much more...
BEASTX MICROBEAST PLUS HD (V5): BeastX's electronic stabilization system in high intensity
A new ECU and more sensitive sensors for more feeling and responsiveness. Unaffected by helicopter vibrations. New lighter alu-composite case. With high current power supply. Always so easy to configure: the world champion system!
The MICROBEAST Plus HD is a 3-axis control system for RC flybarless helicopters. The latest generation MEMS sensors measure the rotational motion of the helicopter with unprecedented precision and transmit the data digitally and in real time to the system.
The composite material housing helps keep the mass of the MICROBEAST Plus very low.
System configuration can be done quickly and anywhere because it does not require expensive computers or programming programs.
All parameters can therefore be changed simply and easily on the flying field!
Other options are available with the USB2SYS interface (optional) and the StudioX software package. Thus, each pilot can customize the device according to his needs.
The MICROBEAST Plus can be updated using the update feature.
The device can be upgraded to ProEdition firmware with AttitudeControl (fallback function) at any time (paid option).
The MICROBEAST PLUS HD is the "heavy duty" version of the MICROBEAST PLUS with an additional high power supply particularly interesting for helicopters equipped with recent "standard" size servos, with high consumption.
Specifications :
Incorporates a power supply system allowing the servos to be powered with a current higher than that coming from the receiver, from a reception battery (NiMh, Lipo 2S or powerful BEC) instead of the traditional servo sockets limited to 5A. Supplied with remote electronic switch.
- Power supply: 3.5V - 8.5V DC (2S LiPo)
- Processor: 32-Bit ARM
- Sensors: 6-axis MEMS (gyro and accelerometer)
- Size: 36 x 25 x 21mm
- Mass without cables: approx. 19g
Technical characteristics :
- Pulse length: cyclic: 1520µs. Tail: 1520µs, 960µs, 760µs
- Servo frequency: cyclic: 50 - 200Hz. Tail: 50 - 560Hz
- Swashplate mixing: mechanical: 90°, 120°, 135°, 140°. With other features via StudioX.
Receiver Compatibility :
- standard receiver
- PPM "Signal Some"
- SRXL (JR XBus, SUMD, M-Link...)
- Futaba S.Bus/S.Bus2
- Spektrum* satellites (DSM2/DSMX) * Requires special cable, available as an option
In the box :
- MICROBEAST PLUS HD
- Cable with switch
- Power cable
- Cables to connect to the receiver
- Double-sided 3M
- Tool for configuration
- User manual in English, paper format
- "BeastX" sticker sheet
Options :
- PC connection interface via USB
- Cable to connect a Spektrum satellite
Manual Beastx Microbeast Plus
Comes with firmware V5.2.2
The new V5 firmware is installed on all versions of Microbeast Plus.
Main features of V5 version :
- Even easier and faster installation.
- The Spektrum satellite can be plugged in directly without an adapter.
- Now supports 4 swashplate servos.
- New features for rescue function (Pro Edition only)
- Bank change (Pro edition only)
- And much more...