Menu
This combo contains 3x HV9767 and 1x 980
MKS HV9767
Torque: 6.8 kg-cm (6.0V) │ 8.5 kg-cm (7.4V) │ 9.4 kg-cm (8.2V)
Speed: 0.090 s (6.0V) │ 0.078 s (7.4V) │ 0.070 s (8.2V)
Weight: 38.55 g
Dimensions：35.5 x 15 x 28.5 mm
Operating Voltage：6.0 ~ 8.4 V DC Volts ( 2S Lipo un-regulated )(It is safe to use BEC @ 5.5V)
Working frequence：1520μs / 333hz
Dead band：0.001 ms (Default)
Bearing Type：2BB
Motor Type：Coreless Motor
Gear Type：Chrome-Titanium alloy gear
Electric current draw: 2.6A max.(8.2V) │ 2.4A max.(7.4V) │ 2.0A max (6.0V)
Wire length：29.5 cm
MKS HBL 980
Dimensions：40 x 20 x 40 mm
Operating Voltage：3.5 ~ 8.4 V DC Volts ( 2S Lipo un-regulated)
Working frequence：760μs / 560hz
Dead band：0.0008ms (Default)
Bearing Type：2BB
Motor Type：4-Pole Brushless Motor
Gear Type：Chrome-Titanium alloy gear
deadband: 0.0008ms (default)
System: Pulse width control
Working frequency: 760μs / 560hz (Compatible with 760μs narrow pulse)
receiver pulse required: 3.5 ~ 7.4 Volt peak signal
Operating Voltage: 6.0~7.4 Volts
Operating temperature: -10 to +60 degrees C
Operating Speed (6.0V): 0.04 sec/60° degree no-load
Operating Speed (7.4V): 0.036 sec/60° degree no-load
Stall torque (6.0V): 4.5 kg.cm
Stall torque (7.4V): 5.6 kg.cm
Motor Type: Brushless
Potentiometer: indirect drive
Double ball bearings
Titanium Chrome Sprockets
Connector Wire Length: 24.0cm
Dimensions: 40 x 20 x 40mm
Weight: 70g