Highlights:

BEC 5.0-8.4V 10A duration / 25A peak

6-12S Lipo

Aluminum casing

plug-in receiver and telemetry cables with JST sockets

New 32-bit processor

full telemetry ability

sinus start

Super slow start for scale helicopters selectable (up to 60sec.)

current limit

Setting the most important parameters directly in the transmitter (Graupner, Jeti and Mikado VBC)

Update and advanced setup via PC software (optional USB adapter required)

Speed ​​limit: 240,000 rpm (2-pole)

Mounting straps directly on the regulator

"T" stands for telemetry.

All common parameters such as current, voltage, capacity, speed, temperature etc. are transmitted.

The following protocols are currently compatible:

- Mikado VBAR

- Futaba, FR-Sky and Spectrum can be transmitted via the YGE-TEXY

- Graupner HoTT V4

- Jeti ExBUS

- Multiplex Sensor BUS V2

- own YGE protocol for further telemetry connections

Technical specifications:

- The specified current is the maximum continuous full gas flow with good cooling.

- 6 to 12s LiPo, reverse regulation or shutdown in case of undervoltage.

- 5 to 12s LiFePo4, undervoltage reset

- BEC 5.0-8.4V 10A duration / 25A peak

- Current limit

- Undervoltage detection can be switched off.

- Speed ​​control (governor mode).

- Softstart.

- Active freewheel, thus unlimited partial load.

- Automatic timing, or adjustable in 6 levels.

- EMK brake adjustable.

- F3A / Acro brake (brake intensity steplessly adjustable in flight).

- Min and Max values ​​are logged and can be displayed in the optional PC tool after the flight (for example, power)

- Speed ​​limit: 240,000 rpm (2-pole)

- Overtemperature / overload warning

- Anti-fog: reduces the starting spark.

- Basic programming via mode setup.

- Fine adjustment and choice of telemetry protocol via PC setup, suitable USB adapter is optionally available.

- Dimensions: 82 x 83.5 x 26 mm

- Weight with / without cable: 122g / 178g