BeastX Microbeast Plus HD Pro Edition

BEASTX MICROBEAST PLUS HD Pro Edition (V5): BeastX's high-intensity electronic stabilization system

A new ECU and more sensitive sensors for more feeling and responsiveness. Insensitive to vibration. New lighter alu-composite case. With High Current Power Supply, Attitude Control and Governor. The all-options world champion system !

The MICROBEAST Plus HD Pro Edition is a 3-axis control system for RC flybarless helicopters. The latest generation MEMS sensors measure the rotational motion of the helicopter with unprecedented precision and transmit the data digitally and in real time to the system.

The composite material housing helps keep the mass of the MICROBEAST Plus very low.

System configuration can be done quickly and anywhere because it does not require expensive computers or programming programs.

All parameters can therefore be changed simply and easily on the flying field!

Other options are available with the USB2SYS interface (optional) and the StudioX software package. Thus, each pilot can customize the device according to his needs.

The MICROBEAST Plus can be updated using the update feature.

This system is delivered with the Firmware ProEdition (V5.2): in addition to the basic functionalities of the Microbeast Plus (Flybarless stabilization and tail gyroscope), an internal speed governor function (for electric or Nitro motorization) is included, but also the very interesting AttidudeControl function which allows to level the helicopter automatically.

The AttitudeControl function offers the possibility of activating different training aids, such as:

- rescue mode (automatic flattening with or without pitch control),

- 3D mode (flattening on the back if the machine is close to inverted flight, with or without pitch control),

- the flight trainer mode (hovering training with angular limits).

The MICROBEAST PLUS HD Pro Edition is the "heavy duty" version of the MICROBEAST PLUS Pro Edition with an additional high power power supply particularly interesting for helicopters equipped with recent "standard" size servos, with high consumption.

Dare all tricks with Microbeast Plus HD Pro Edition!

Specifications :

Incorporates a power supply system allowing the servos to be powered with a higher current than that coming from the receiver, from a reception battery (NiMh, Lipo 2S or powerful BEC) instead of the traditional servo sockets limited to 5A. Supplied with remote electronic switch.

- Power supply: 3.5V - 8.5 Volts DC (LiPo 2S)

- Processor: 32-Bit ARM

- Sensors: 6-axis MEMS (gyro and accelerometer)

- Size: 36 x 25 x 21mm

- Mass without cables: approx. 19g

 Technical characteristics :

- Pulse length: cyclic: 1520µs. Anti-torque: 1520µs, 960µs, 760µs

- Servo frequency: cyclic: 50 - 200Hz. Tail: 50 - 560Hz

- Swashplate mixing: mechanical: 90°, 120°, 135°, 140°. With other features via StudioX.

Receiver Compatibility :

- standard receiver

- PPM "Signal Some"

- SRXL (JR XBus, SUMD, M-Link...)

- Futaba S.Bus/S.Bus2

- Spektrum* satellites (DSM2/DSMX) * Requires special cable, available as an option

In the box :

- MICROBEAST PLUS HD Pro Edition

- Cable with switch

- Power cable

- Cables to connect to the receiver

- Double-sided 3M

- Tool for configuration

- User manual in English, paper format

- "BeastX" sticker sheet

Options :

- PC connection interface via USB

- Cable to connect a Spektrum satellite

Manual Beastx Microbeast Plus

Comes with firmware V5.2.2

The new V5 firmware is installed on all versions of Microbeast Plus.

Main features of V5 version :

- Even easier and faster installation.

- The Spektrum satellite can be plugged in directly without an adapter.

- Now supports 4 swashplate servos.

- New features for rescue function (Pro Edition only)

- Bank change (Pro edition only)

- And much more...